• [[ImgSrc-moreshare]]

Contact Us

Tel:+86-576-84087925

Fax:+86-576-84087926

Mob:+8618969612882

info@seacomould.com

Add: No.1 Beiyuan Rd, Beicheng, Huangyan, Taizhou, Zhejiang, China

Home > Knowledge > Content
10 points determine the cost of the Injection mould Apr 14, 2018

How much will a plastic injection mould cost? There are many factors that go into determining the cost.

1.       Part size — Large parts require large molds, resulting in greater material cost.

2.       Part design — Intricate part designs require elaborate mold designs, which generally

increase the tool cost. Simple part designs require less complexity in the mold design, lowering the cost of the tool.

3.       Material selection — If the plastic used is volatile or corrosive, requires high mold

temperatures, or contains abrasive materials such as mineral, glass or carbon fiber, the cost of the tool might increase. These factors could also impact the maintenance cost of the mold (a residual cost).

4.       Part tolerance strategy — Parts with tight tolerances will require additional mold

manufacturing steps, which increases both the manufacturing and tool maintenance costs (residual costs).

5.       Annual volume — High-volume (think hours of production, not number of parts)

projects need higher quality tools to provide reliable service, which increases the cost of the tool. A higher number of cavities is also associated with greater manufacturing costs.

6.       Cycle time — To achieve fast machine cycles, a tool needs uniform cooling throughout

the cavity impression (and from cavity to cavity in multi-cavity tools). This requires well-designed tooling and higher precision build, both of which increase the tool construction cost and potentially the maintenance cost.

7.       Gate location — Proper gate location is critical to part quality, but tools that do not have

gates at the side of the part require construction techniques that increase tool cost. Additionally, the use of hot manifold systems significantly increases the tool price but frequently lowers the part price and/or tool complexity.

8.       Mold cooling — The mold functions like a heat exchanger, drawing heat from the molten

plastic. Uniform cooling throughout the cavity impression will yield the highest quality part and the fastest cycle time. Different cooling strategies will impact the tooling manufacturing cost.

9.       Manufacturing country — Cost and quality vary by country. Lower-cost tools usually

have some challenges. Choose what makes sense based on your needs.

10.   Design/Build — A well-designed mold has lower residual costs, is easier to set up and

to start, has lower reject rates and a predictable and consistent cycle time, and will perform well beyond its required life expectancy. Your supplier will provide reliable quality, cost and delivery when using a properly designed, built and maintained mold. On the other hand, an unreliable tool impedes production and requires extra time and effort to repair.