Contact Us

Tel:+86-576-84087925

Fax:+86-576-84087926

Mob:+8618969612882

info@seacomould.com

Add: No.1 Beiyuan Rd, Beicheng, Huangyan, Taizhou, Zhejiang, China

Home > News > Content
The Injection molding machine process Mar 31, 2018

The injection molding machine is a special plastic molding machine. It uses the thermo plasticity of plastics. After being heated and melted, it is put into the mold cavity with high pressure. After a period of pressure keeping and cooling, it becomes a plastic product of various shapes.To manufacture a finished plastic injection mould component there is a process that we should follow

1.Prepare the mould

•Clean the mould tool to remove mould protection.

•Clear the tool vents to prevent gassing issues.

•Ensure that the tool is suitably lubricated to function.

 2. Prepare the material

Issue the required amount of thermoplastic material to complete the production run.

Remove moisture from the material in a dedicated dryer in line with processing parameters when required.

Mix the material with master batch to achieve the required colour (If the material is compounded to the finished color this is not necessary).

3. The injection moulding process

The prepared thermoplastic is poured into the Hopper.The material funnels down into the screw which is heated to melt the plastic.

The barrel is heated at staged temperatures along its length (approx. 5 zones) to allow the material to solidify and to move along the screw.

The screw rotates which moves the material forward with the pressure and speed determined to fill the cavity efficiently.

When the material exits the nozzle at the end of the barrel it is injected into the feed channels of the mould tool.

The feed channels allow this material to flow into the open cavity of the mould tool which forms the shape of the finished product.

The mould tool is held at a constant temperature to allow ease of material flow and to also draw out the heat from the product after injection, so, the material sets off to a solid form.

After a predetermined cooling time the mould tool is opened when the moving platen carrying the ejection half is retracted.

The mould tool opens with the product held in the ejection half of the tool.

The ejection system then moves forward to release the product from the mould tool.

The product is gathered in the collection box after the cycle is complete or the parts can be picked from the tool as required.

IMG_0237.jpg